How to turn off the Tiggo maintenance light
Recently, the maintenance light reset problem of Tiggo series models has become one of the hot topics among car owners. Many car owners find that the maintenance reminder light on the dashboard is still on after doing maintenance or changing the engine oil themselves, and they don't know how to eliminate it. This article will combine the popular discussions and technology sharing on the Internet in the past 10 days to provide you with a detailed analysis of the elimination method of Tiggo maintenance lights and provide structured data reference.
1. The function of Tiggo maintenance light
The maintenance light is a reminder function for vehicle maintenance cycles, usually triggered based on mileage or time. The maintenance light of Tiggo models will light up under the following circumstances:
| Trigger condition | Description |
|---|---|
| Mileage reaches 5000-7500km | Default maintenance intervals for most Tiggo models |
| Time reaches 6 months | Whichever comes first |
| Manual reset unsuccessful | The system was not reset correctly after the last maintenance |
2. How to eliminate the maintenance light of popular models
According to recent discussion data on forums and car enthusiast groups, the following are the reset methods for three mainstream Tiggo models:
| car model | Operation steps | Things to note |
|---|---|---|
| Tiggo 8 | 1. Turn the key to the ON position 2. Press the accelerator three times in a row 3. Turn off the power and then restart it | The operation needs to be completed within 10 seconds |
| Tiggo 7 | 1. Long press the ODO button 2. Turn the key to the ON position 3. Keep it on for 5 seconds until the light goes out | Some models require steering wheel buttons |
| Tiggo 5x | 1. Press and hold the TRIP button when the flame is off 2. Start the vehicle and hold for 5 seconds 3. Observe the instrument prompts | After 2022 models, a diagnostic instrument is required |
3. Summary of recent frequently asked questions from car owners
By analyzing the discussion data on major platforms in the past 10 days, the following high-frequency issues were sorted out:
| Problem phenomenon | Proportion | solution |
|---|---|---|
| Manual reset is invalid | 42% | It is recommended to check the operating sequence or use a diagnostic tool |
| Relapse soon after reset | 28% | It may be that the maintenance data has not been completely reset. |
| Confusing methods for different models | 19% | Need to confirm the specific year and configuration |
| System error code | 11% | Professional equipment is required to read fault information |
4. Professional maintenance suggestions
1.Operation timing: It is recommended to perform reset operation immediately after completing maintenance to avoid system misjudgment.
2.Equipment assistance: It is recommended to use OBD-II diagnostic instrument for models after 2020, which has a higher success rate.
3.Things to note: Some hybrid models need to operate in READY mode
4.ultimate solution: If multiple attempts fail, you can go to the 4S store to reset the ECU data.
5. Latest technology trends
According to a recent official technical announcement from Chery, starting from December 2023, some new Tiggo models will support the remote reset and maintenance reminder function via mobile APP. Specific supported models include:
| car model | APP function online time | Operation path |
|---|---|---|
| Tiggo 8 PRO | 2023.12.15 | Zhiyun Internet-Vehicle Health |
| Tiggo 9 | 2024.01.10 | Vehicle system-maintenance settings |
Summary: The method of removing the Tiggo maintenance light varies depending on the model and year. It is recommended that the car owner first consult the vehicle manual. If manual reset is unsuccessful, consider purchasing a universal OBD tool or seeking professional help. With the development of Internet of Vehicles technology, the management of maintenance reminders will be more intelligent in the future.
check the details
check the details
en
