How to weld wires: hot topics and practical guides on the Internet in the past 10 days
Recently, wire welding has become one of the most popular practical skills on the Internet, especially among DIY enthusiasts, electrician training and home repair fields. This article will combine the hot content of the past 10 days to provide you with structured data and detailed operation guides.
1. Hot topics related to wire welding in the past 10 days on the entire network
| Ranking | hot topics | Discussion platform | heat index |
|---|---|---|---|
| 1 | Safety precautions for household wire welding | Zhihu/Douyin | 985,000 |
| 2 | Comparison of welding techniques for wires made of different materials | Station B/Tieba | 762,000 |
| 3 | Actual measurement of new soldering method without solder | YouTube/Kuaishou | 658,000 |
| 4 | Guide to avoid pits when purchasing welding tools | Taobao Live/Xiaohongshu | 534,000 |
2. Standard operating procedures for wire welding
According to the professional standards for electricians (GB/T 2900.18-2022) and recent popular teaching video content, the standardized welding process is as follows:
| steps | Operational points | Common mistakes |
|---|---|---|
| 1. Preparation | Wear safety goggles and ensure the work area is well ventilated | Ignore security protection |
| 2. Wire processing | Stripping length 8-10mm, stranded multi-strand wire | Stripping the wire too short or damaging the conductor |
| 3. Preheat the soldering iron | Adjust to 300-350℃ (depending on the melting point of solder) | Excessive temperature and burnt wires |
| 4.Welding operations | Tin the wires first, then butt-solder them | Excessive soldering leads to short circuit |
| 5.Quality inspection | Test continuity and check solder joint gloss | No power-on test |
3. Comparison of welding solutions in different scenarios
Based on the recent sales data and user reviews of major e-commerce platforms, the following program selection suggestions are compiled:
| Application scenarios | Recommended solder types | Soldering iron power | Auxiliary tools |
|---|---|---|---|
| Home appliance repair | Silver-containing solder wire (0.8mm) | 40-60W | Solder absorber |
| Automobile line reconstruction | High temperature solder (containing copper) | 80W adjustable temperature | heat shrink tube |
| Electronic components | Lead-free low temperature solder | 30W constant temperature | magnifying glass stand |
4. Answers to recent hot questions
1.Question: What should I do if there is always a weak weld during welding?
Answer: According to the popular teaching video recommendations at Station B, it is necessary to ensure that: ① the soldering iron tip is clean ② the wire tip is completely removed from the oxide layer ③ the welding time is controlled within 3 seconds.
2.Q: Can I do emergency welding without professional tools?
Answer: Douyin's popular life tips show that you can use a lighter to heat a screwdriver instead of a soldering iron, but it is only for single emergency use, which poses a safety hazard.
3.Q: How to judge the quality of solder joints?
Answer: Zhihu’s highly praised answer pointed out that high-quality solder joints should: ① The surface is bright and conical, ② No burrs, ③ The solder completely wraps the thread.
5. Safety warning (based on recent accident reports)
1. It is strictly prohibited to weld near flammable materials. Recently, a DIY blogger caused a fire because he did not clean his workbench.
2. Toxic gases will be produced when welding wires with PVC insulation, so you must wear a mask
3. Children should not come into contact with welding tools. The soldering iron needs to be placed in a special stand to cool down after use.
Mastering the correct wire welding techniques not only solves daily maintenance problems, but is also an important life skill. It is recommended that beginners refer to recent popular teaching videos on major platforms and start with basic exercises step by step.
check the details
check the details
en
