What fuel is added to the loader gearbox? Combining comprehensive analysis with hot topics
Recently, among the hot topics about construction machinery maintenance, "What oil is added to the loader transmission" has become the focus of discussion. This article combines the hot contents of the entire network for the past 10 days to analyze in detail the selection, precautions and common problems of transmission oil use, and attaches structured data comparison to help you quickly grasp key information.
1. Why is the choice of transmission oil crucial?
The loader gearbox is the core component of power transmission, and the quality of oil directly affects the transmission efficiency, component life and failure rate. Recently, under the topic of "Construction Machinery Maintenance", a short video platform has seen a case of the scrapping of the transmission due to the wrong oil use, which has attracted widespread attention.
| Oil type | Applicable temperature | Replacement cycle | Price range (yuan/liter) |
|---|---|---|---|
| GL-5 gear oil | -20℃~50℃ | 1000 hours | 80-120 |
| TO-4 special oil | -30℃~60℃ | 2000 hours | 150-220 |
| Fully synthetic oil | -40℃~80℃ | 3000 hours | 260-350 |
2. The top 3 hot issues in recent times
1."Can car gear oil be replaced?": The construction machinery forum discussed this week increased by 120%. Experts emphasized that insufficient extreme pressure resistance of automobile oil will lead to bearing wear.
2.“Winter Oil Selection”:Douyin#Mechanical maintenance topic, northern users have concentrated on the difficulty of starting low temperatures, and it is recommended to use synthetic oil labeled SAE 75W-90.
3."The consequences of mixing oil products": The actual test of a well-known maintenance live broadcast room shows that mixing oil products from different brands will lead to a three-fold increase in the generation of sludge.
3. Authoritative oil selection guide
| Loader model | Original recommended oil products | Alternatives |
|---|---|---|
| ZL50 | Sinopec Great Wall L-CKD320 | Mobil DTE 20 |
| CAT 950 | Cat TO-4 | Shell Spirax S4 TXM |
| Liugong 856 | Kunlun Tiangong HM68 | Castrol SynTrans 80W-90 |
4. Precautions for hot spots in oil change operations
1.Oil volume control: Popular Weibo videos show that 80% of users over-advocate should be strictly referenced to the dipstick scale.
2.Oil change cycle: Zhihu's special discussion points out that 30% of the cycle needs to be shortened under harsh working conditions.
3.Simultaneous replacement of filter element: Compared with the actual test of UP on Bilibili, if the filter element is not replaced, the pollution level of new oil will immediately exceed the standard.
5. Industry trend observation
Recently, Baidu Index showed that the search volume of "transmission oil" increased by 45% year-on-year, reflecting three major trends:
1. Synthetic oil penetration rate increases by 18% annually
2. Increased attention to intelligent monitoring equipment
3. Recycled oil technology has become a hot topic in scientific research
Summary: When choosing loader gearbox oil, you must comprehensively consider factors such as working conditions, temperature, equipment model, etc. to avoid blindly following the trend. It is recommended to bookmark the comparison table provided in this article and pay attention to oil technology updates regularly, which can extend the service life of the gearbox by more than 30%.
check the details
check the details
en
